Antique table change up using milk paint and stain oil finish. Let me show you how.
Scrub the piece well to remove any dirt and grime accumulated over the years. I like to add TSP Alternative to the soapy water especially on antiques to really get a deep clean. Let dry.
Love the old way of construction: these wooden pins lock the table top to the base, just push in or pull out to remove the top.
Most antiques need a bit of repairs after their hard work over the years.
The original finish top was in pretty good condition for its age but there were a couple of areas so it was stripped.
video process: not all finishes strip as easily
This finish was a bugger to remove and took 3 coats of stripper and lots of scraping. In hindsight I would have left the original finish as is knowing this ;)
While I was stripping wood pieces I did 3; this antique table, a french provincial coffee table and a french provincial dresser (tutorial to be posted soon).
The top was then sanded to smooth the top and remove any bits of finish that remained.
The table top was uneven so I removed the portion it sits on the pedestal.
TIP: The screws were rusted but a spray of WD-40 had them out in not long.
The block was planed and sanded level and flipped over for a level surface.
The solid brass feet patina'd over the years.
Using metal polish they were hand rubbed to a pretty shine.
polished pretty
This is one coat on including the top edge. Two coats were brushed on for the prefect coverage.
Sand distressing allows the wear to show naturally; usually along the edges and most prominent areas. The entire pedestal was then sealed using Homestead
House Clear Wax.
It is the perfect final step.
Check out Homestead House Paint Co.; this is my affiliate link but prices are not increased using it. It does give a small commission so I can continue to share these free tutorials with you to help on your milk paint learning journey.
FEATURED
August 30. 2020
Linked up at
Comments
Post a Comment