Perhaps you recall the large work bench we built for our shop, a neighbor loved it and requested one built for his shop too. Here is his which was custom built to seat multiple people around it to work at counter height.
To build this table required
- 3 - 4" X 4" X 8' treated posts
- 25 - 2" X 4" X 10' boards
- 1 tub of #8 2 1/2" long screws
The top was laid out with an apron edge screwed together then the posts cut in half and set in place to decide the best most stable location that still allows seating around the table.
Cross supports were cut and set in place.
With more boards laid in place ready to assemble.
They were then screwed in place to the posts. No screws were put thru from the top of the table.
Once secured on the under side we lifted and flipped this behemoth wooden work bench over.
The underneath shelf was screwed in place. This adds even more stability and strength to the bench.
It is complete and ready to be delivered via skid steer to the neighbors shop where it was put to work immediately.
And here it is with work underway on it
Featured on
Shared at these link up parties
Comments
Post a Comment